Product Description
UV water sterilizer
Potabilization of water Treatment
UV water sterilizer (Ultraviolet sterilizer) refers to a device that uses an ultraviolet mercury lamp as a light source and uses 253.7nm ultraviolet rays radiated by mercury vapor in the tube as the main spectral line to sterilize drinking water (abbreviated as sterilizer).
UV disinfection has no dead ends, good light emission conditions, low energy consumption, equipment installation and removal flexibility, no secondary pollution, UV disinfection is relatively chlorine sterilization, he has no need to add chemicals, no secondary pollution, no The mixing equipment greatly reduces the operating cost of the equipment. If it is drinking water, the ultraviolet sterilizer is safe and will not adversely affect the human body due to the excessive amount of medicine. Compared with the ozone sterilizer, the ultraviolet sterilizer has the advantages of low energy consumption, no large mixer, no fishy smell, etc., which not only has a good look and feel, but also reduces operating costs.
Ultraviolet sterilizer is widely used
UV sterilizer has high value in water treatment. It destroys and changes the DNA structure of microorganisms through the irradiation of ultraviolet light, so that the bacteria die immediately or cannot reproduce their offspring to achieve the purpose of sterilization. It is ZXB ultraviolet that really has the bactericidal effect , because the C-band ultraviolet is easily absorbed by the organism's DNA, especially the ultraviolet around 253.7nm. Ultraviolet sterilizer is a purely physical disinfection method. It has the advantages of simple and convenient, broad-spectrum and high-efficiency, no secondary pollution, easy management and automation. With the introduction of various new-designed ultraviolet lamps, the application range of ultraviolet sterilization has also continued Expanding.
How does the UV sterilizer work?
| Total iron content | Less than 0.3ppm(0.3mg/L) |
| H2S | Less than 0.05ppm(0.05mg/L) |
| Total suspended matter | Less than 10 mg/L |
| Manganese content | Less than 0.05 mg/L |
| Water hardness | Less than 120 mg/L |
| Chroma | Less than 15centigrade |
| Water Temp. | 5-60Centigrade |
| PH value | 6.5-8 |
| Interface type | flange or thread |
| Flow rate | 0.3--1000 ton/hour |
Application
Reclaimed water recycling
Devices for secondary water supply of the living community
Disinfection of the treated municipal sewer
Disinfection of water for aquiculture and processing
Disinfection of purified water for shellfish species
Disinfection of water in aquaria and water tanks
Disinfection of tap water, purified water and mineral water
Disinfection of water for the food and beverage industries_
Disinfection of water for such water recreational facilities as swimming poor, etc. Disinfection of drinking water for residential, office and restaurant buildings, etc. Disinfection of bacteria-free water for pharmacy, cosmetics and other such manufacturing industries
Disinfection of water for hospitals Water for bases, ships and vessels and submarine vessels as well as field activities
Disinfection of water for agricultural irrigation
Disinfection of water for municipal landscapes
Disinfection of water for the water treatment system of central air conditioning in commercial buildings
Disinfection of cooling water for various large power stations
Disinfection of drinking water for commercial planes and large passenger planes Disinfection of water for large poultry and livestock farms
Disinfection of water for small domestic drinking machine
Greenhouse seedling culture Aquaculture
Water for municipal landscapes
Disinfection of water for hospitals
Food and beverage
Principle for UV sterilization
All forms of life known on the earth exist on the basis of DNA and RNA for reproduction and existence. DNA and RNA are both composed of 4 kinds of chemical substance units.
A--Adenine
T--Thymine
C--Cytosine
G--Guanine (the basic component for the nucleic acid)
In time of cell reproduction, the long chains inside DNA are opened when Unit A in each chain will look for and connect with Unit T. Each long chain can reproduce an identical chain to the chain freshly split, restore the complete DNA before splitting and serve as the foundation for the new-borne cells. However, the ultraviolet at a wave length of 240-270nm is able to break the capacity of DNA to produced protein and reproduction. Once the DNA and RNA of bacteria and viruses are damaged, their capacity to produce protein and reproduction are both lost. As the bacteria and viruses usually have a very short life cycle, those will soon perish that cannot reproduce.
The effective of UV sterilization is often expressed in killing ratio, e.g., 99.9%. Namely, 99.9% of the original bacteria have been killed and only 0.1% exists, or, 1/1 000 has survived. As 1000 is the 3 in 103 or in log, it is habitually to express the killing ratio with 310g. The killing ratio of ultraviolet depends on two factors: 1, ultraviolet intensity (I); and 2, irradiation time (T).
Advantages of Modern UV C Disinfection)
The UV C Disinfection Technology has been widely accepted by the world for its superior effect in disinfection on cell viruses and other Factors to be Considered Liquid chlorine disinfection Chlorine dioxide disinfection Ozone disinfection LW disinfection pathogenic agents. UVC water disinfection technology has the following obvious advantages.
High-efficiency sterilization
Sterilization of cell viruses with UV C is generally within one second. In comparison, the traditional UV and Cl and Ozone Methods takes 20 min to one hour to match the effect of UVC.
No secondary pollution
As the UV-c Technology can be controlled within the scope of killing the bacteria or viruses only and it is unnecessary to add any chemicals, it Operation complexity Simple to middle grade Simple to middle grade will not cause the secondary pollution to the water body and the surround environment. Meanwhile, it will not change any component of the water.
It makes continuous mass sterilization possible.
The modern UV-C disinfection equipment can work 24 hours a day and 365 days a year. Except for the general maintenance within the fixed time, the optimum operation condition is the 24-hour continuous operation.
Operation and maintenance is simple and easy and of low cost.
With the improvement of UV-C core technology, the UV-C disinfection technology is not only the means of the highest disinfection rate of all the disinfection methods but also the simplest and easiest in operation and maintenance and of the lowest cost, reaching RMB 0.004 Yuan/T of water. Therefore, cost performance ratio is the highest of all the disinfection technologies. It has the high efficiency advantage superior to other sterilization technologies but also is the lowest in cost and expenses for operation and maintenance.
Safe and Reliable Operation
In terms of the traditional sterilization technology, like the methods of using the chloride or ozone, the disinfectant itself is highly toxic, flammable and explosive. Application of these substances causes latent threat to the site operators, the surrounding environment and the nearby residents. The modern ultraviolet disinfection system, however, does not bear such potential risks.
Process flow
When preparing the pure water or high-purity water, predesalination is often conducted with the reverse osmosis units and the ion exchange process is taken for deep desalination. The ultrafiltration device is adopted to further remove the colloids, microorganisms, bacteria and mechanical particles in the water. The main process flow for preparing the pure water or high-purity water with the ultrafiltration units consists of:
Raw water Pre-Processing RO Ion exchange Ultraviolet sterilizer
Ion exchange UltrafiItration User
Effectively treating water with higher concentration levels than listed above can be accomplished, but may require added measures to improve water quality to treatable levels. If, for any reason, it is believed the UV transmission is not satisfactory, contact the factory.
UV wavelength (nm)
DOSAGE is the product of intensity & time
dosage=intensity*time=micro watt/cm2*time=microwatt-seconds per square centimeter
(μW-s/cm2)
Note:1000μW-s/cm2=1mj/cm2(milli-joule/cm2) |
| City water supplies | 850-980‰ |
| De-ionized or Reverse Osmosis water | 950-980‰ |
| Surface waters(lakes, rivers, etc) | 700-900‰ |
| Ground water(wells) | 900-950‰ |
| Other liquids | 10-990‰ |
| Total iron content | Less than 0.3ppm(0.3mg/L) |
| H2S | Less than 0.05ppm(0.05mg/L) |
| Total suspended matter | Less than 10 mg/L |
| Manganese content | Less than 0.05 mg/L |
| Water hardness | Less than 120 mg/L |
| Chroma | Less than 15centigrade |
| Water Temp. | 5-60Centigrade |
| PH value | 6.5-8 |
| Interface type | flange or thread |
Product Parameters
| Model | Flow rate
(T/H) | Lamp Power
(W) | Inlet & outlet | Connect type | Shell dimension (mm)
L×W |
| mm | inch |
| HL-1-21 | 1 | 21 | 20 | 1/2" | BSPT | 89*500 |
| HL-1-42 | 2 | 42 | 25 | 1" | BSPT | 108*500 |
| HL-1-80 | 6 | 80 | 40 | 1+1/2" | BSPT | 89*900 |
| HL-1-100 | 100 | 40 | 1+1/2" | BSPT | 89*1200 |
| HL-2-80 | 10 | 160 | 50 | 2" | BSPT | 108*900 |
| HL-2-100 | 12 | 200 | 65 | 2+1/2" | FLANGE | 108*1200 |
| HL-3-80 | 15 | 240 | 65 | 2+1/2" | FLANGE | 133*900 |
| HL-3-100 | 20 | 300 | 80 | 3" | FLANGE | 133*1200 |
| HL-4-80 | 25 | 320 | 100 | 4" | FLANGE | 159*900 |
| HL-4-100 | 40 | 400 | 100 | 4" | FLANGE | 219*1200 |
| HL-3-150 | 45 | 450 | 125 | 5" | FLANGE | 159*1600 |
| HL-6-80 | 50 | 480 | 125 | 6" | FLANGE | 219*900 |
| HL-6-100 | 60 | 600 | 150 | 6" | FLANGE | 219*1200 |
| HL-8-80 | 65 | 640 | 150 | 6" | FLANGE | 273*900 |
| HL-8-100 | 80 | 800 | 150 | 6" | FLANGE | 273*1200 |
| HL-6-150 | 100 | 900 | 150 | 6" | FLANGE | 219*1600 |
| HL-10-100 | 120 | 1000 | 200 | 8" | FLANGE | 273*1200 |
| HL-8-150 | 150 | 1200 | 200 | 8" | FLANGE | 273*1600 |
| HL-10-150 | 180 | 1500 | 200 | 8" | FLANGE | 273*1600 |
| HL-12-150 | 250 | 1800 | 250 | 10" | FLANGE | 273*1600 |
Installation Instructions
After Sales Service
Pre-sale service
1.We have full stock and can deliver within short time.
2.Any kind of logo printing or design are available.
3.Good Quality + Factory Price + Quick Response + Reliable Service, is what we are trying to offer.
4.All of our products are produced by our professional workman and we have our high-work-effect foreign trade team, you can totally believe our service.
After you choose
1. We will count cheapest shipping cost and make invoice to you at once.
2. Check quality again, then send out to you at 1-2 working day after your payment
3. Email you the tracking No., and help to chase the parcels until it arrive you.
After-sale service
1.We are very glad that customers give us some suggestion for price and products.
2.If you have any question, please contact us freely by E-mail or Telephone.
){kind=link}